The installation of Roller shutter electric motor requires professional knowledge and skills. The electric motor of Roller shutter is an electric device, which is used to automatically roll up or unfold Roller shutter. The installation of this equipment needs to follow certain steps and procedures. The professional skills of installing the electric motor of Roller shutter will be introduced in detail below.
First, confirm the size and weight of the Roller shutter before installation to ensure that the electric motor can meet the requirements of the door body. Choose an appropriate electric motor based on the size and weight of the door body, and the power and torque of the motor should match the size and weight of the door body. In addition, it is necessary to determine the installation position of the Roller shutter and the position of the power socket for installation and commissioning.
Secondly, installing the electric motor requires fixing the door body before installing the motor. The motor needs to be installed on one side or top of the door body and connected to the door body through a bracket. The installation position of the bracket should maintain a certain degree of verticality with the motor shaft, otherwise the motor may experience deviation or oscillation.
Next, it is necessary to connect the electric motor to the power cord. The power cord should be made of standard wire to ensure safety and reliability. At the same time, it is necessary to connect the protective grounding wire to the ground wire to prevent electrical components from leaking electricity. After wiring, electrical test is required to check whether the motor circuit is normal.
Debug the electric motor of Roller shutter. Before commissioning, it is necessary to check whether the wires of the motor are properly connected as required, whether the motor can reach the normal power and whether it works normally. During commissioning, it is necessary to close the door body first, then turn on the power supply, and observe whether the electric motor works normally and whether the door body operates smoothly. If an abnormal situation occurs, it is necessary to promptly troubleshoot the problem.
In a word, the installation of Roller shutter electric motor requires certain professional skills and experience. Before installation, it is necessary to understand the size and weight of the door body, confirm the selection of electric motors, and determine the installation position of the door body and the position of power sockets. During the installation process, attention should be paid to the verticality of the fixed motor position and safe and reliable electrical wiring. During debugging, it is necessary to strictly follow the regulations to ensure the normal and stable operation of the door body.
The article comes from the internet. If you have any questions, please contact us!