Welcome to the official website of Fujian Yadalong Motor Co., Ltd

What are the installation requirements for the electric motor of Roller shutter?

Click: Time:2023-06-01 15:19:23

Before the installation of the electric motor for Roller shutter, it is necessary to determine the position of the door body, the position of the mounting bracket and the position of the parking limiter, so as to ensure that the installed electric motor for Roller shutter can work normally and realize the function of opening and closing the door. The following are the key points to pay attention to when installing the electric motor of Roller shutter.

1. Determine the position of the door body: The installation position of the electric motor of the Roller shutter depends on the position of the door body. It is necessary to confirm whether the wall where the door body is located can bear the weight of the motor and mounting bracket. Before installation, it is necessary to measure the width, height, and positioning method of the door body, and determine the specifications of the motor based on the door body material and usage environment.

2. Determine the position of the installation bracket: After confirming the position of the door body, it is necessary to measure the distance and height of the door body from the edge of the wall to determine the position of the installation bracket. When installing the bracket, it is necessary to use specialized expansion bolts and washers to ensure that the bracket is reinforced and stable. If the electric motor for the Roller shutter door of a larger size is installed, the bracket needs to be specially strengthened to ensure that the electric motor can work properly.

3. Determine the position of the parking limiter: the electric motor of the Roller shutter needs to be equipped with a parking limiter to control the opening and closing height of the door body. The parking limiter needs to be installed above the door body, connected to the motor bracket, and linked with the motor. The position of the parking limiter depends on the height and opening method of the door body, and needs to be determined after measuring the height and opening method of the door body.

4. Assembly of electric motor: The electric motor needs to be installed on the mounting bracket. When installing the motor, it is necessary to pay attention to connecting the power cord, controller, and limit circuit to the motor and ensure a stable connection.

5. Connecting controller: the electric motor of the Roller shutter needs to connect the controller and the door opening and closing buttons to realize the function of opening and closing the door. The connection and wiring of the controller need to follow the circuit diagram and instructions, and ensure that the line joints are stable and well insulated.

6. Debugging: After the installation of the electric motor of the Roller shutter, it needs to be debugged to ensure its normal operation. Firstly, it is necessary to press the door opening and closing button to observe whether the door can be opened and closed normally. Then, it is necessary to debug the parking limit device to ensure that the height of the door opening and closing is correct. During the height adjustment process of the door body, it is necessary to pay attention to safety to prevent pinching or jamming.

7. Removing obstacles: After the debugging of the door body is completed, it is necessary to remove obstacles around the door body to ensure smooth operation of the door body. It is necessary to clean up the debris and debris around the door body and avoid the door body colliding with walls or other objects. At the same time, it is necessary to clean and maintain the electric motor of Roller shutter to extend its service life.

In a word, before installing the electric motor of Roller shutter, it is necessary to accurately measure the size and position of the door body, and determine the motor specification in combination with the use environment and door body materials. During installation and debugging, it is necessary to strictly follow the instructions and circuit diagram to ensure the normal operation of the electric motor, while paying attention to safety. In the process of use, the electric motor of Roller shutter needs regular maintenance to ensure its long-term stable operation.

The article comes from the internet. If you have any questions, please contact us!


图片展示

National Service Hotline:

0593-6333238

Contact person: Mr. Zhu Tel: 15359706011

Contact person: Mr. Lei  Tel: 15359701039

Address: No. 100, Zhanyang Village, Chengyang Town, Fu'an City

 customer service

WeChat official account

Copyright (©) Fujian Yadalong Motor Co., Ltd  

Filing number:闽ICP备15020387号-1    

Copyright (©) Fujian Yadalong Motor Co., Ltd  Filing number:闽ICP备15020387号-1  Technical Support:Kaihong Technology

添加微信好友,详细了解产品
使用企业微信
“扫一扫”加入群聊
复制成功
添加微信好友,详细了解产品
我知道了